Instruction Metra Line Output Converter Wiring Diagram (2024)

Introduction: Have you ever wanted to upgrade your car's audio system but found yourself perplexed by the wiring diagram for the instruction Metra Line Output Converter? Fear not, as this article aims to provide a comprehensive guide, written in a conversational tone, to help you understand the wiring process and ensure a successful installation. So, let's dive in!

Heading 1: Understanding the Basics of a Line Output Converter Subheading 1: What is a Line Output Converter (LOC)? Subheading 2: Why do you need an LOC for your car's audio system?

Heading 2: Components of the Metra Line Output Converter Subheading 1: Input and Output Channels Subheading 2: Gain Control Subheading 3: Remote Turn-On

Heading 3: Tools and Materials Required for Wiring Subheading 1: Wire Cutter and Stripper Subheading 2: Electrical Tape Subheading 3: Crimping Tool Subheading 4: Wiring Harness Connectors Subheading 5: Wiring Diagram Provided by Metra

Heading 4: Wiring Process Step-by-Step Subheading 1: Identify the factory radio harness and locate the speaker wires. Subheading 2: Connect the speaker wires to the LOC input channels. Subheading 3: Connect the LOC output channels to the amplifier inputs. Subheading 4: Connect the remote turn-on wire from the LOC to the amplifier. Subheading 5: Test the connections and ensure everything is working correctly.

Heading 5: Troubleshooting Tips Subheading 1: No sound from the amplifier? Subheading 2: Distorted sound or low volume? Subheading 3: Check the ground connection.

Conclusion: Congratulations! You have successfully completed the wiring process for the instruction Metra Line Output Converter. With this guide, you can now confidently upgrade your car's audio system and enjoy a superior sound experience. Remember to follow the wiring diagram provided by Metra and test the connections before finalizing the installation.

FAQs:

  1. Can I use the Metra Line Output Converter with any car audio system?
  2. Are there any risks involved in installing the Line Output Converter myself?
  3. What if I don't have experience with car audio wiring?
  4. Can I adjust the gain control on the Line Output Converter?
  5. How can I ensure a clean and professional-looking installation?

Remember, this article is a comprehensive guide to help you understand the wiring process for the instruction Metra Line Output Converter. If you have any further questions or concerns, it is always recommended to consult a professional car audio installer. Happy wiring and enjoy your enhanced audio experience!


1. [PDF] AX-MLOC725 Installation Instructions - AWS

  • 26 nov 2013 · The Line Output Converter (LOC) should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 150 ...

2. [PDF] AX-MLOC720 Installation Instructions - AWS

  • The LOC should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found ...

3. 2 Channel Line Output Converter | - Metra Electronics

  • Adjustable gain level · Converts speaker wire outputs to RCA outputs · Allows the addition of an amplifier to the factory stereo · Compact size.

  • Metra OY-AJLO adjustable line out converter. When adding an amplifier to a OEM stereo the line out converter takes the speaker-level output signal from the radio and converts it into RCA preamp-level signal that most amplifiers require.

4. [PDF] ALOC60 2 Channel, Adjustable, Line Output Converter - Metra Dealer

  • Installation: The ALOC60 should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 30 watts per channel.

5. AX-ALOC710 | Axxess Integrate

  • This Line Output Converter is designed to work with OEM radios that have ... Signal sense turn-on. Instruction Manual · AX-ALOC710. Become a Dealer to Order.

  • 2 Channel, Adjustable Line Output Converter with Short Protection 55 Watt

6. User manual Metra 70-5521 (English - 2 pages)

  • I bought a metra line output converter and would like to install the bass knob but the wire is not long enough on the knob it has a 3.5mm headphone jack to ...

  • Manual Metra 70-5521. View the Metra 70-5521 manual for free or ask your question to other Metra 70-5521 owners.

7. [PDF] INSTALLATION INSTRUCTIONS - Metra Electronics

  • The Line Level Adapter has signal level output adjustments on the top of the Adapter (see diagram), and is set from the factory about half way up. If, after ...

8. Metra BY LOC - Line Output Converter - device.report

  • AX-ADCT2 INSTALLATION INSTRUCTIONS The AX-ADCT2 should be installed on a stereo s speaker output wires or the output wires on an OEM amplifier of up to 80 watts ...

  • Metra BY LOC

Metra BY LOC - Line Output Converter - device.report
Instruction Metra Line Output Converter Wiring Diagram (2024)
Top Articles
Latest Posts
Article information

Author: Rueben Jacobs

Last Updated:

Views: 5939

Rating: 4.7 / 5 (77 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Rueben Jacobs

Birthday: 1999-03-14

Address: 951 Caterina Walk, Schambergerside, CA 67667-0896

Phone: +6881806848632

Job: Internal Education Planner

Hobby: Candle making, Cabaret, Poi, Gambling, Rock climbing, Wood carving, Computer programming

Introduction: My name is Rueben Jacobs, I am a cooperative, beautiful, kind, comfortable, glamorous, open, magnificent person who loves writing and wants to share my knowledge and understanding with you.